EPSON AcuLaser C2600/2600
4.5.11.3 PAPER, SUPPORT, SUB, MP/PAPER, SUPPORT, MP/
LEVER, UPPER, MP
1.
Open the MP TRAY.
2.
Draw out the PAPER, SUPPORT, MP and open the PAPER, SUPPORT, SUB,
MP.
3.
With the center of the PAPER, SUPPORT, SUB, MP bowed downward, pull out
the 2 holes (front and rear) from the PAPER, SUPPORT, SUB, MP from the 2
dowels to remove the PAPER, SUPPORT, SUB, MP.
4.
With the center side of the PAPER, SUPPORT, MP bowed downward, draw out
the tab on one side of it from the HOUSING, MP to remove the PAPER,
SUPPORT, MP.
Look out for the COMPRESSION SPRING, 2.52 as it may pop up
C A U T I O N
when performing the following work.
5.
Remove the screw that secures LEVER, UPPER, MP to remove the LEVER,
UPPER, MP and the COMPRESSION SPRING, 2.52.
C.C.P-TITE SCREW,3x6,F/Zn: 1
Disassembly and Assembly
PAPER, SUPPORT,
SUB, MP
Disassembling/Assembling the Main Unit
3-2
3-1
LEVER,
UPPER, MP
5-1
PAPER,
SUPPORT, MP
3-3
Figure 4-116. Removal of PAPER, SUPPORT, SUB, MP/
PAPER, SUPPORT, MP/LEVER, UPPER, MP
Revision B
3-2
4-3
4-2
4-1
04009801
325