EPSON AcuLaser C2600/2600
4.5.3.5 CLUTCH, GATE
1.
Remove the DRIVE ASSY., MAIN.
2.
Release the harness of the CLUTCH, GATE from both the 3 grooves of the frame
and the edge saddle, and disconnect the connector from the relay connector.
(White 2 Pin)
3.
Remove the RETAINING RING, 4 that secures the CLUTCH GATE, and draw
out the CLUTCH GATE.
1.
Insert the CLUTCH, GATE to the attachment shaft with attention
to their shape of cross-section.
2.
Match the antirotation tab of the frame with the antirotation
groove of the CLUTCH, GATE.
Disassembly and Assembly
(p.301)
Disassembling/Assembling the Main Unit
CLUTCH, GATE
Reassembly 1,
2-1
2-1
2-1
2-1
2-2
Figure 4-50. Removal of CLUTCH, GATE
Revision B
3
2
04003802
259