Epson AcuLaser C2600 Service Manual page 305

EPSON AcuLaser C2600/2600
REINSTALLATION
C A U T I O N Always replace the DRIVE ASSY., RT, with a new DRIVE
ASSY., RT, ASP.
Never to remove the parts attached to the DRIVE ASSY., RT,
ASP until you are told to do so. Removing those parts before
installing the DRIVE ASSY., RT, ASP to the main unit leads
to a malfunction of the printer.
A1. Remove the BOARD ASSY., DRV, C585 DRV.
A2. Remove the R/W MODULE, B5J-0111.
When performing the following work, pay attention to the items
C A U T I O N
described below.
Once a toner cartridge is removed, the FRAME ASSY., RT
becomes unstable and rotates violently. So as not to hurt your
fingers, rotate the FRAME ASSY., RT by turning the section
where the R/W MODULE, B5J-0111 was attached.
Make sure to rotate the FRAME ASSY., RT in the direction
of the arrow (counter clockwise direction).
Make sure to turn the power off before removing/installing
toner cartridges.
Never touch the Developer roller.
A3. Push up the lock lever of the LOCK ASSY., RT to release the lock of the FRAME
ASSY., RT, rotate the FRAME ASSY., RT until it comes to the toner cartridge
replace position, and remove all the toner cartridges.
A4. Rotate the FRAME ASSY., RT to the Magenta replace position, and again rotate
the FRAME ASSY., RT for one step in the counter clockwise direction.
Disassembly and Assembly
(p.312)
(p.316)
Disassembling/Assembling the Main Unit
LOCK ASSY., RT
A3-1
FRAME ASSY., RT
A3-2
A4
Figure 4-96. Reinstallation of DRIVE ASSY., RT, ASP 1
Revision B
A4
Toner Cartridge
A3-3
04014002
305