Epson AcuLaser C2600 Service Manual page 155

EPSON AcuLaser C2600/2600
Paper Out
Error Occurrence/Error Detection Method
This error occurs when the Paper Sensor turns off.
Possible Parts Caused the Error
Section No.
Standard 1 LATCH, CASSETTE
Paper
2 BRACKET ASSY., PE, ASP
Feeder
3 DETECTION, PAPER LOAD
Optional 1 CONNECTOR, OP
Paper
2 LATCH, CASSETTE
Feeder
3 DETECTOR, HP; E
4 DETECTION, PAPER LOAD
MP tray 1 DETECTOR, HP; E
Check Point
Section No.
Standard Check if the Lift Plate operates normally. Insert the paper
Paper 1 cassette into the printer and judge the operation status of the
Feeder Lift Plate by the sound created when it is moved up.
2 Replace the [BRACKET ASSY., PE, ASP].
3 Replace the [DETECTION, PAPER LOAD].
Optional Check if the Lift Plate operates normally. Insert the paper
Paper 1 cassette into the printer and judge the operation status of the
Feeder Lift Plate by the sound created when it is moved up.
2 Replace the [CONNECTOR, OP].
3 Replace the [DETECTOR, HP; E].
4 Replace the [DETECTION, PAPER LOAD].
MP tray 1 Replace the [DETECTOR, HP; E].
Troubleshooting
Part Name Reference
page 339
page 262
page 341
page 347
page 339
page 346
page 349
page 323
Check Point
Troubleshooting According to the Error Message
Revision B
155