EPSON AcuLaser C2600/2600
8.
Remove the 2 screws that secure the DUCT ASSY., FU, lift up the DUCT ASSY.,
FU upward, and pull the harness of the CLUTCH, CLEANER out of the hole.
C.P.POLYWAVEA,3x6,F/Zn: 2
2.
Match the 2 dowels of the DUCT ASSY., FU with the positioning
holes.
9.
Release the harness of the HARNESS, HV, 2ND TRANSFER from the groove of
the DUCT ASSY., FU to disconnect the connectors.
Disassembly and Assembly
Reassembly
DUCT ASSY., FU
Disassembling/Assembling the Main Unit
2
8-1
HARNESS, HV,
2ND TRANSFER
Figure 4-72. Removal of CLUTCH, CLEANER 2
Revision B
8-2
8-1
9-1
9-2
04005501
280