Epson AcuLaser C2600 Service Manual page 248

EPSON AcuLaser C2600/2600
4.5.2.10 LEVER, TENSION/COVER, INNER
LEVER, TENSION
1. Open the COVER, FRONT.
2. Remove the screw that secures the LEVER, TENSION to remove the LEVER,
TENSION.
C.C.S-TITE SCREW,3x6,F/Zn: 1
Insert the LEVER, TENSION into the TRANSFER UNIT, Assy.,
ASP with attention to their shape of cross section, then secure the
LEVER, TENSION with a screw preventing the lever from
rotating.
COVER, INNER
1). Remove the Photoconductor unit.
2). Remove the Filter. (p.236)
3). Remove the HOUSING ASSY., TOP.
4). Remove the COVER, FRONT. (p.246)
5). Remove the LEVER, TENSION.
6). Remove the 6 screws that secure the COVER, INNER.
C.C.S-TITE SCREW,3X8,F/Uc: 6
7). Pull the topside of the HOUSING, LEFT toward left and pull the downside of the
COVER, INNER toward you to release the 2 tabs. And then slide the COVER,
INNER toward upside releasing the other 2 tabs to remove the COVER, INNER.
Disassembly and Assembly
(p.235)
(p.241)
(p.248)
Disassembling/Assembling the Main Unit
7)-1
COVER, INNER
7)-2
Figure 4-39. Removal of LEVER, TENSION/COVER, INNER
Revision B
Reassembly
LEVER,
TENSION
6)
6)
2-1
2-2
6)
7)-3
6)
6)
6)
7)-2
04002702
248