Epson AcuLaser C2600 Service Manual page 273

EPSON AcuLaser C2600/2600
4.5.6.3 LEAF SPRING, ELCTRODE, DV/
Home Position Sensor (DETECTOR, PC)
LEAF SPRING, ELCTRODE, DV
1. Release the HIGH VOLTAGE POWER SUPPLY, EUKMBE925HA.
2. Pull the bottom of the LEAF SPRING, ELECTRODE, DV toward you, slide it
upward to release the tab, and remove the LEAF SPRING, ELECTRODE, DV.
Home Position Sensor (DETECTOR,PC)
1). Remove the MOUNTING PLATE ASSY., CONTROLLER,UNIT.
2). Release the HARNESS, HP from the 4 tabs.
3). Remove the screw that secures the MOUNT, SENSOR, HP, and remove the
MOUNT, SENSOR, HP avoiding the HARNESS, MAIN.
C.C.P-TITE SCREW,3x8,F/Zn: 1
4). Release the 4 tabs to remove the Home position sensor.
5). Disconnect the connector from the Home position sensor.
Disassembly and Assembly
(p.314)
(p.314)
Figure 4-65. Removal of LEAF SPRING, ELCTRODE, DV/Home Position Sensor
Disassembling/Assembling the Main Unit
Home Position
Sensor
4)-2
5)
2-2
2-1
LEAF SPRING,
ELCTRODE, DV
2)
Revision B
MOUNT,
SENSOR, HP
3)
4)-1
4)-1
4)-1
4)-1
04004801
273