EPSON AcuLaser C2600/2600
4.5.4 Xerographic
4.5.4.1 ERASER, PA0003A/ERL
1.
Remove the TRANSFER UNIT, Assy., ASP.
2.
Remove the three screws that secure the ERASER, PA0003A/ERL.
C.B.S-TITE SCREW,2.5x4,F/Zn: 3
3.
Disconnect the connector (White 2 Pin) from the ERASER, PA0003A/ERL and
remove the ERASER, PA0003A/ERL.
Match the 3 positioning holes of the ERASER, PA0003A/ERL with
the dowels.
Disassembly and Assembly
(p.284)
Disassembling/Assembling the Main Unit
ERASER, PA0003A/ERL
2
2
Reassembly
Figure 4-54. Removal of ERASER, PA0003A/ERL
Revision B
2
3
04004101
263