Epson AcuLaser C2600 Service Manual page 47

EPSON AcuLaser C2600/2600
Setup Menu
Setting
Lang English
Lang Français
Sprache Deutsch
Lingua Italiano
IDIOMA ESPAÑOL
SPRÅK SVENSKA
Sprog Dansk
Taal Nederlands
Kieli SUOMI
Líng. Português
Språk Norsk
Idioma CATALA
Time Out 0, 5 to 60 to 300 step 1
Paper Source Auto, MP, LC1,
MP mode Normal, Last
ManualFeed Off, 1st Page, EachPage
Copies 1 - 999
2
Quantity* 1 - 999
Duplex Off, On
Binding Long Edge, Short Edge
3
Start Page* Front, Back
Paper Type Normal, Thick, Trnsprnc
Page Side Front, Back
4
Skip Blank Page* Off, On
Auto Eject Page Off, On
Size Ignore Off, On
Auto Cont Off, On
Page Protect Auto, On
Product Description
Setting values
1
LC2*
Setting
Toner Out
LCD Contrast
5
Panel Lock*
Note *1: Displayed and selectable only when the optional paper cassette unit is installed.
*2: Not displayed on the panel nor printed on the Status Sheet. Can be set with EJL and
PJL. It is not stored on EEPROM.
*3: Displayed and selectable only when the duplex unit is installed. The following paper
sizes are available for duplex printing; A4, A5, Letter, EXE, and B5. Other sizes are
available for simplex printing.
*4: Valid in the PCL5e and ESC/Page, ESC/P2, FX, and I239X modes.
*5: Not displayed on the panel nor printed on the Status Sheet. Can be set with EJL,
EPSON Net Config (Web), etc.
Control Panel
Setting values
Stop, Continue
0 to 7 to 15
Off, On
Revision B
47