Epson AcuLaser C2600 Service Manual page 352

EPSON AcuLaser C2600/2600
4.6.1.9 ROLLER, PAPER FEED, OP
1. Remove the CLUTCH, FEED. (p.351)
2. Remove the E-RING, 5, F/Uc that secures BUSHING, 6 on the left end of the
ROLLER, PAPER, FEED, OP. And remove the BUSHING, 6 from the ROLLER,
PAPER, FEED, OP.
First match up the circular arc notch of the GROUNDING
PLATE, FEED with the positioning hole on the GUIDE, FEED,
OP, and then attach the BUSHING, 6 to the ROLLER, PAPER
FEED, OP through the hole.
3. Remove the E-RING, 5, L/NA that secures the BUSHING, 6 located at the center
of the ROLLER, PAPER, FEED, OP and slide the BUSHING, 6 backward.
4. Slide the ROLLER, PAPER, FEED, OP toward right, pull out the left shaft, and
slide toward right again.
5. Remove the E-RING, 5, F/UC that secures the BUSHING, 6 on the right end of
the ROLLER, PAPER, FEED, OP, and pull out the BUSHING, 6 from the
ROLLER, PAPER, FEED, OP.
6. Pull out the ROLLER, PAPER FEED, OP toward upper left, and remove the
center BUSHING, 6 from the ROLLER, PAPER FEED, OP.
Disassembly and Assembly
2-1
Disassembling/Assembling the Options
ROLLER,
PAPER FEED, OP
4
Reassembly
2-2
Figure 4-143. Removal of ROLLER, PAPER FEED, OP
Revision B
5-2
5-1
6-2
6-1
3-1
3-2
04012601
352