EPSON AcuLaser C2600/2600
4.5.3.4 CLUTCH, FEED/CLUTCH, PICK UP
CLUTCH, FEED
1.
Remove the SERVOMOTOR, DRIVE.
2.
Remove the RETAINING RING, 4 that secures the CLUTCH, FEED to remove
the CLUTCH, FEED from the attachment shaft.
3.
Release the harness of the CLUTCH, FEED from both the groove and the edge
saddle, and disconnect the connector (Yellow 2 Pin) from the relay connector.
1.
Insert the CLUTCH, FEED to the attachment shaft with attention
to their shape of cross-section.
2.
Match the antirotation tab of the frame with the antirotation
groove of the CLUTCH, FEED.
CLUTCH, PICK UP
1). Remove the SERVOMOTOR, DRIVE.
2). Remove the RETAINING RING, 5, DRIVE that secures the CLUTCH, PICK UP
to remove the CLUTCH, PICK UP from the attachment shaft.
3). Release the harness of the CLUTCH, PICK UP from the edge saddle, and
disconnect the connector (Blue 2 Pin) from the relay connector.
1). Insert the CLUTCH, PICK UP to the attachment shaft with
attention to their shape of cross-section.
2). Match the antirotation tab of the frame with the antirotation
groove of the CLUTCH, PICK UP.
Disassembly and Assembly
(p.300)
(p.300)
Disassembling/Assembling the Main Unit
3)-2
3)-1
3-1
3-1
3-2
Figure 4-49. Removal of CLUTCH, FEED/CLUTCH, PICK UP
Revision B
Reassembly 1,
Reassembly 1),
CLUTCH, FEED
2-1
2)-1
CLUTCH, PICK UP
2
2)
04003701
258