5. To attach the scanner cover, push it down into the connecting part firmly until it clicks in
place.
6. Send the error recovery command from the driver to recover the printer from error status.
4.2.2 When Paper is Jammed in the Validation Section
1. Directly remove the jammed paper.
2. Send the error recovery command from the driver to recover the printer from error status.
4.2.3 When Paper is Jammed in the Roll Paper Section
1. Open the roll paper cover by pushing the roll paper cover open button.
2. Remove the jammed paper.
3. Load the roll paper again and close the roll paper cover.
4. Send the error recovery command from the driver to recover the printer from error status.
Rev. F
TM-J9000/J9100 Technical Reference Guide
Troubleshooting 4-5