Verifying Memory - HP 3000 9x9KS Service Manual

Example — Installing New Memory in an Empty Extender
1. Four 128MB SIMMs
2. Six 64MB SIMMs
and two 32MB SIMMs
3. Two 16MB SIMMs
Install. Order
First pair of modules
Second pair of modules
Third pair of modules
Remaining
module
Shaded boxes indicate pairs of modules

Verifying Memory

To verify the newly-installed memory, reboot the system and interrupt the boot process at the "Press Any
Key Within 10 Seconds" prompt. At the Boot Console Handler (BCH) prompt, type IN[formation] to get
the Information Menu. At the Information Menu, type ME[mory] to display the current system memory
configuration.
= Two 256MB modules
(one pair of 256MB modules)
= Three 128MB modules and one 64MB module
(2 pairs of 128MB/64MB modules)
= One 32MB module
Slots
0a/0b 256MB module
1a/1b 256MB module
2a/2b 128MB module
3a/3b 128MB module
4a/4b 128MB module
5a/5b 64MB module
6a/6b 32MB module
7a/7b empty
Memory Configuration Guidelines
Memory
C-6