Firmware Differences; Expanded Chiprevision Information; Configuration Issues; Memory For Hp9000/Kx70/Kx80 Servers - HP 3000 9x9KS Service Manual

Firmware Differences

Expanded ChipRevision Information

In the PDC, the ChipRevision command in the Information Menu has been modified to provide additional
information. Following is an example of the new CR command:
Main Menu: Enter command or menu > in cr
Module
------
System Board
PA 8200 CPU Module
PA 8200 CPU Module
PA 8200 CPU Module
PA 8200 CPU Module
PA 8200 CPU Module
PA 8200 CPU Module
PDC Firmware
Tower
Memory Carrier 0
Memory Carrier 1
I/O Bus Adapter 0
Shrike Board
Zalon
I/O Bus Adapter 1
Core I/O Board
Zalon
GeckoBoa
NIO module
Lasi
GeckoBoa
HSC 1 (40MHz)
HSC 2 (32MHz)
Main Menu: Enter command or menu >

Configuration Issues

Beginning with this edition of the service manual, special configuration issues will be identified in this
section:

Memory for HP9000/Kx70/Kx80 Servers:

Kx70/Kx80 systems with four to six CPUs that use the minimum 256MB memory size REQUIRE that the
memory consist of at least four SIMMs (two modules).
D-2 New System Features
Revision
--------
1
5.1
5.1
5.1
5.1
5.1
5.1
502
9
Regular
Not present
15
1
2
15
1
2
Not available
0
0
Not available