processor cards installed. The HP 9000/K2x0 can have 1 or 2 processor cards (two in the front). The
HP3000/939KS can have only one processor card mounted in the front.
The HP9000/K100 Processor chip is mounted on the system card. To replace the CPU, the entire sys-
tem card has to be replaced.
Front Processor Card
The front Processor cards are Processor slots 0 and 1.
Removal: Refer to Figure 7-2 and Figure 7-3.
1. Remove the front bezel.
2. Remove the Processor/Memory cover plate (1), by loosening the four captive screws and pulling it
away.
7-4
Removal and Replacement
NOTE
Figure 7-2 Processor/Memory Cover Plate