HP 3000 9x9KS Service Manual page 201

ASC ASCQ Description
17 02 Recovered Data Using Positive Offset
17 03 Recovered Data Using Negative Offset
17 04 Recovered Data with Retries and /or CIRC Applied
17 05 Recovered Data using Previous Sector ID
17 06 Recovered Data Without ECC - Data Auto Reallocated
18 00 Recovered Read data with ECC (not with retries)
18 01 Recovered Data with ECC and Retries Applied
18 02 Recovered Data with ECC and/or Retries, Data Auto-Reallocated
18 03 Recovered Data with CIRC
18 04 Recovered Data with LEC
18 05 Recovered Data - Recommend Reassignment
19 00 Defect List error
19 01 Defect List Not Available
19 02 Defect List Error in Primary List
1A 00 Parameter Overrun
1A 00 Illegal Transfer Length in the CDB (sense key 5)
1B 00 Synchronous data transfer error
1C 00 Defect List not Found
1C 01 Primary Defect List not Found
1D 00 Compare errors
1D 00 Miscompare During Verify Operation
20 00 invalid Command Operation Code
21 00 illegal Logical Block Address
21 01 Invalid Element Address
24 00 Illegal field in Command Descriptor Block (CDB)
25 00 Invalid Logical Unit Number (LUN)
26 00 Invalid filed in Parameter List
26 01 Invalid element address
26 01 Parameter not Supported by the Devices Boot Code (sense key 3)
26 01 Parameter not Supported
26 02 Invalid transport element
26 02 Parameter Value Invalid
26 02 Write Buffer Parameter Invalid
26 03 Invalid source element
26 03 Invalid Field Parameter - Threshold Parameter
26 04 Invalid destination element
26 05 Invalid second destination element
26 06 Illegal function
Table 8-10 Hardware Status Bytes 12 and 13
Notes
1, 4
1, 4
6
6
1
1
1
6
6
6
1
1
5
1
1
1
2
5
6
1
5
1
SCSI and I/O 8-13