Power Supply Fan Assembly - HP 3000 9x9KS Service Manual

Power Supply Fan Assembly

Removal: Refer to Figure 7-25
1. Ensure power is OFF. Disconnect the power cord from the system.
2. Remove the four screws indicated by arrows on the face of the fan assembly.
3. Pull the fan assembly away from the power supply.
4. Disconnect the fan assembly power cable.
Figure 7-25 Power Supply Fan Assembly
Replacement:
1. Re-connect the fan assembly power cable.
2. Insert the fan assembly body into the power supply.
3. Secure the fan assembly in place using the four screws in the locations shown by arrows.
4. Re-connect power to the system.
Removal and Replacement 7-31