HP 3000 9x9KS Service Manual page 141

3. Grasp the formed edge of the processor card (1 or 2 in Figure 7-3, with the rubber bumper), and
gently pull the card to unseat it from the system board and remove it from the cabinet.
4. Place the CPU card on an antistatic pad.
Replacement:
1. Align the Processor card in the appropriate slot (with the air guide and components toward the right
side of the card).
2. Insert the Processor card until it contacts the system card, then press firmly.
3. Replace the Processor/Memory cover plate.
1 — Processor 0
2 — Processor 1
Figure 7-3 Processor Card Location
1
2
Removal and Replacement 7-5