Graphics Terminal Configuration - HP 3000 9x9KS Service Manual

Enterprise servers
Hide thumbs Also See for 3000 9x9KS:
Table of Contents

Advertisement

Location/Description
Core I/O card console connector
Core I/O card UPS connector
Core I/O card Internal or External modem
connector
HP-PB 0, slot 1
HP-PB 0, slot 2
HP-PB 0, slot 3
HP-PB 0, slot 4
Core I/O SCSI connector
Internal Peripheral Bay, slot A
Internal Peripheral Bay, slot B
Core I/O card FW DIFF SCSI connector
Internal Peripheral Bay, slot C (boot disk)
Internal Peripheral Bay, slot D
Internal Peripheral Bay, slot E
Internal Peripheral Bay, slot F
Core I/O card, ALS or THINLAN connector
HP-PB 1, slot 1
HP-PB 1, slot 2
HP-PB 1, slot 3
HP-PB 1, slot 4

Graphics Terminal Configuration

If a graphics terminal is to be used as the system console you must be aware of the following rules and path
address requirements.
If you are installing a graphics terminal in a system that currently uses a standard RS-232 terminal for
its console, you must reconfigure the PDC path address for the graphics console before removing the
standard RS-232 console from the system.
Supported Graphics Device: The HP A4330A 17" Monitor, the A4331A 20" Monitor, and the A4331B
20" Monitor are the only supported graphics devices at this time. The Monitors will automatically set
themselves to match the graphics device adaptor (A2999A or A3519A). The graphics device adaptor has
the following characteristics:
Resolution = 1280 x 1024
Scan Rate = 75Hz
2-12
Install and Configuration
Table 2-4. HP 3000/9x9KS Path Addressing
Device Type
HP 700/96 system console
1300VA PowerTrust (UPS)
HP LAM for Internal modem or
an External modem
HP-PB I/O card
HP-PB I/O card
HP-PB I/O card
HP-PB I/O card
SE SCSI Interface
SE SCSI CD-ROM
SE SCSI DDS Drive
FW DIFF SCSI Interface
FW SCSI disk drive
FW SCSI disk drive
FW SCSI disk drive
FW SCSI disk drive
Appropriate LAN cable
HP-PB I/O card
HP-PB I/O card
HP-PB I/O card
HP-PB I/O card
Caution
Address Path
10/4/0.0
10/4/0.3
10/4/0.1
10/4/4. (device addr)
10/4/8. (device addr)
10/4/12. (device addr)
10/4/16. (device addr)
10/4/20. (device addr)
10/4/20.2
10/4/20.0
10/4/24
10/4/24.6
10/4/24.5
10/4/25.4
10/4/25.3
10/4/0
10/16/4. (device addr)
10/16/8. (device addr)
10/16/12. (device addr)
10/16/16. (device addr)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 k-class

Table of Contents