Configuration Changes For Csc; Configuration Changes For Igp For Csc - Cisco ASR 9000 Series Configuration Manual

MLDP Carrier Supporting Carrier Based MVPN
mdt source Loopback101
interface all enable
!
vrf vpn101
address-family ipv4
mdt source Loopback1111
rate-per-route
interface all enable
accounting per-prefix
bgp auto-discovery mldp
!
mdt default mldp p2mp
!
address-family ipv6
mdt source Loopback1112
rate-per-route
interface all enable
accounting per-prefix
bgp auto-discovery mldp
inter-as
!
mdt default mldp p2mp
mdt data 5
!
!
!
router pim
address-family ipv4
hello-interval 600
join-prune-interval 180
nsf lifetime 180
!
vrf vpn101
address-family ipv4
rpf topology route-policy p2mp
hello-interval 600
join-prune-interval 180
mdt c-multicast-routing bgp
!
rp-address 101.3.1.11
log neighbor changes
bsr candidate-bsr 101.4.100.1 hash-mask-len 32 priority 1
bsr candidate-rp 101.4.100.1 priority 192 interval 60
!
address-family ipv6
rpf topology route-policy p2mp
hello-interval 600
!
!
!

Configuration Changes for CsC

The following are the configuration changes that are required for supporting CsC solution:

Configuration Changes for IGP for CsC

The following are the configuration changes that are required for IGP for supporting CsC solution:
• OSPF configuration: on the two inner core P-PE routers, MC15 and MC17.
• Static routes: required for CsC features, are configured on the eBGP links between P-PE and C-PE.
The IGP configurations will be similar to the following:
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
152
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software