Data Cloning; Cloning Between Transceivers; Cloning Using A Personal Computer - Icom IC-9100 Instruction Manual

D
The IC-9100 has transceiver-to-transceiver data clon-
ing capability.
This function is useful when you want to copy all of the
programmed contents from one IC-9100 to another.
q Connect a mini plug cable to the [REMOTE] jack of
the master and sub transceivers.
transceiver.
w
While holding down [F-1] on the sub transceiver,
push [POWER] to turn ON the power and enter the
cloning mode.
While holding down [F-2] on the master transceiver,
push [POWER] to turn ON the power and enter the
cloning mode.
standby mode.
cate it as the master transceiver.
e Push [OUT](F-5) on the master transceiver.
play, and the bar meter shows that data is being trans-
ferred to the sub-transceiver.
ceiver's display, and the bar meter shows that data is
being received from the master transceiver.
r When cloning is finished, turn power OFF, then ON
again to exit the cloning mode.
ceiver's display after the cloning is completed.
D
The optional CS-9100
CLONING SOFTWARE
clone/edit contents with a PC using ICF format files.
® ®
Microsoft Windows XP (32bit), Windows Vista
®
or Windows 7 (32/64bit) OS is required.
PC. (Purchase separately)
Use as short a mini plug cable as possible.
Depending on the length of the cable, data cloning
cannot be done.
-
-
-
-
is also available to
®
(32/64bit)
MAINTENANCE
Mini plug cable
[REMOTE]
(Purchase separately)
PC
[USB]
USB cable
(Purchase separately)
17
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
182