Ptt Hold; Data Cloning; Other Functions - Icom IC-41PRO Advanced Manual

7

OTHER FUNCTIONS

PTT Hold

You can use the PTT switch as a one-touch PTT switch
(each push switches between transmit and receive).
You can transmit without holding down [PTT] using this
function. To prevent accidental continuous transmission
with this function, transmission automatically stops
after 3 minutes.
q Hold down [TOP] for 2 seconds to enter the Set
mode.
w Push [Side 1] several times to select the PTT Hold
function item.
e Rotate [ROTARY SELECTOR] to turn ON the PTT
Hold function.
PTT Hold function
OFF (default)
r Hold down [TOP] for 2 seconds to set and return to
the standby mode.
t Push [PTT] to transmit, and push again to return to
receive.
• STATUS INDICATOR lights red while transmitting.
NOTE: You cannot use the PTT Hold function with an
optional microphone connected. The PTT Hold
function setting is invalid on the optional microphone.
PTT Hold function ON
16

Data cloning

Data cloning enables you to transfer data quickly and
easily from a PC to your transceiver, using the optional
CS-41PRO
clOning sOftware
Data cloning can be done to or from a PC, using the
CS-41PRO
clOning sOftware
OPC-478UC (USB type)
PC
To a USB port
USB cable
.
and the optional
.
clOning cable
IC-41PRO
[VOL]
To the [SP] jack
OPC-478UC