Saving Your Own Or Received Position Data; Display The Grid Locator Information; Gps Automatic Transmission - Icom IC-9100 Instruction Manual

D
q Hold down [CALL/GPS] for 1 second to display the
"GPS" screen.
w Push [POS](F-1), then push [F-2] once or twice to
display your own or the caller's (other station) posi-
tion information.
screen.
e Hold down [F-5] for 1 second to save the position
data to GPS memory (G00).
the next Memory channel already contains information.
D
The Grid Locator expresses the latitude and longitude
position data in a short string of characters. The IC-
9100 can display it on the LCD.
q Hold down [CALL/GPS] for 1 second to display the
"GPS" screen.
w Push [POS](F-1), then push [F-2] one or more times
to display the position information.
e While holding down [F-4], the grid locator informa-
tion is displayed.
D
In the DV mode, this function automatically transmits
the GPS receiver's current position data, at a selected
interval.
When a GPS message is programmed, the transceiver
transmits it along with the position data. See page 125
for the GPS message programming.
q Hold down [CALL/GPS] for 1 second to display the
"GPS" screen.
w Push [SET](F-5) to enter the GPS Set mode.
e Push [Y](F-1) or [Z](F-2) to select "GPS Auto TX."
r Rotate [MAIN DIAL] to select the desired position
3, 5, 10 or 30 minutes, or OFF.
* If four GPS sentences are selected in GPS Set mode on
page 122, "5 sec." cannot be selected.
t Push [MENU] to save, and return to the "GPS"
screen.
GPS automatic transmission. (p. 93)
Use GPS automatic transmission in only the sim-
plex mode.
GPS automatic transmission through a repeater
may interfere with other communications.
GPS/GPS-A OPERATION
[F-2] [F-5]
[POS] [CALL/GPS]
M
3 5 ˚ 4 5 . 0 0 ' N
1 3 5 ˚ 3 6 . 0 0 ' E G L : P M 7 5 T S
Hold down
[ ] [ ] [SET]
[MENU] [CALL/GPS]
SET G P S A u t o T X
Ù Ú
11
OFF (default)
9
1
2
3
4
5
6
7
8
9
10
11
12
13
[MAIN DIAL]
14
15
16
17
18
O F F
19
20
21
124