Selecting 1 Hz Step; Auto Tuning Step Function; 1/4 Tuning Step Function; Frequency Setting - Icom IC-9100 Instruction Manual

3
BASIC OPERATION
Frequency setting (Continued)
D
tuning.
q Push [TS] to turn OFF the Quick Tuning function.
w Hold down [TS] for 1 second to turn the 1 Hz tuning
step ON or OFF.
1 Hz tuning steps.
[UP]/[DN] switches of the microphone are used
for frequency tuning (if the quick tuning function is
not selected.)
D
When you rotate [MAIN DIAL] rapidly, the tuning speed
can automatically accelerate, depending on the "MAIN
DIAL Auto TS" option in the Set mode.
q Hold down [MENU] for 1 second to enter the Set
mode.
w Push [Y](F-1) or [Z](F-2) to select "MAIN DIAL
Auto TS."
e Rotate [MAIN DIAL] to select the HIGH or LOW
tuning speed acceleration, or to turn OFF the func-
tion.
smaller steps, the tuning speed is approxi-
mately five times faster.
When the tuning step is set to 5 kHz or
larger steps, the tuning speed is approxi-
mately two times faster.
(default)
fault value.
r Push [MENU] to save, and exit the Set mode.
D
1 ⁄
4
The dial speed is reduced to
1
when the ⁄ tuning function is ON, for finer tuning con-
4
trol.
1
frequency band.
This function is selectable only when the quick tuning
function is turned OFF.
q Push [MENU] to display the "M1" screen (menu 1).
w Push [1⁄4](F-3) to turn the
OFF.
" appears when the
39
∂TX are used, they also tune in
1
⁄ of the normal speed
4
⁄ tuning function in each operating
4
1
⁄ tuning function ON or
4
1
⁄ tuning function is ON.
4
[ ] [ ]
M1
A G C D U P
[MENU]
SET M A I N D I A L A u t o T S
Ù Ú
44
-
[MENU]
M1
[TS]
[MAIN DIAL]
1 Hz step indication
C O M P T B W S C P
[MAIN DIAL]
H I G H
HIGH (default)
[1⁄4]
Appears