Ptt Hold Function; Data Cloning - Icom IC-440 Instruction Manual

8
OTHER FUNCTIONS

■ PTT hold function

The PTT switch can be operated as a one-touch PTT switch
(each push toggles between transmit/receive). Using this
function you can transmit without pushing and holding the
PTT switch.
To prevent accidental, continuous transmission with this
function, the time-out timer function is automatically set
within the transceiver. See pgs. 40, 45 for details.
q Push and hold
w Push
F * or
SET
e Push
or
r Push and hold
push and hold
t When the PTT hold function is set to ON, push [PTT] to
transmit and push again to receive.
• " " appears while transmitting.
*Regardless of the assigned key function.
38
F for 2 sec. to enter set mode.
(Set Mode)
SET
MONI * several times until "P--HLD" appears.
T SQL
to set the PTT hold function ON or OFF.
for 2 sec. to turn the power OFF, or
F
for 2 sec. to exit set mode.
(Set Mode)
SET

■ Data cloning

[
Cloning allows you to quickly and easily transfer the data
from a personal computer to a transceiver using the optional
CS-440
CLONING SOFTWARE
Data can be cloning to and from a personal computer (Mi-
®
crosoft Windows
bit)) using the optional CS-440
optional cloning cable OPC-1122U (USB type).
Consult the CS-440
to USB port
.
® ®
2000/XP/Microsoft Windows Vista
CLONING SOFTWARE
HELP fi le for details.
CLONING SOFTWARE
PC
to the [MIC] connector
OPC-1122U
(USB type)
TM
(32
and the
IC-440