Mode Switches; Filter Switch; Transmit Frequency Check Switch - Icom IC-9100 Instruction Manual

1
PANEL DESCRIPTION
Front panel (continued)

@9 MODE SWITCHES

Push to select your desired operating mode. (p. 43)
mode when the "SPEECH [MODE] SW" item is set to
"ON" in the Set mode. (p. 164)
(p. 47)
Push to alternately select the USB or LSB modes.
In SSB mode, hold down for 1 second to se-
the
lect SSB data mode (USB-D, LSB-D).
the
D" appears in addition to "USB" or "LSB."
In the SSB data mode, push to return to the normal
SSB mode.
[CW/RTTY] (pp. 48, 56)
modes.
Hold down for 1 second to switch between
CW and CW-R
mode.
selected.
Hold down for 1 second to switch between the
selected.
[AM/FM] (p. 61)
Push to alternately select the AM or FM modes.
Hold down for 1 second to select the AM or FM
data mode (AM-D/FM-D).
D" appears in addition to "AM" or "FM."
In the data mode, push to return to the normal
AM or FM mode.
HF/50MHz frequency bands.
MHz frequency band.
5
@9
modes, in
(CW reverse) the
#1 #2 # 3 # 4 # 5 #6 #7
#0
(p. 85)
Push to select the DV mode.
Hold down for 1 second to select the DR mode.
" appears.
In the DR mode, push to cancel it.
" disappears.
#0 FILTER SWITCH [FILTER] (p. 73)
Push to select one of three IF filter settings ( / /
).
are displayed for 2 seconds on the LCD display.
Hold down for 1 second to display the "FIL"
screen (Filter) to set the filter passband width.
When the "FIL" screen is displayed, hold down for
1 second to return to the previous screen display.
#1 TRANSMIT FREQUENCY CHECK SWITCH [XFC]
the
During split frequency or repeater operation, hold
CW
down to listen to the transmit frequency. (p. 82)
quency can be changed with the main dial, keypad
or memo pad.
[XFC] to cancel the dial lock function. (pp. 82, 162)
When the RIT function is turned ON, hold
down to listen to the receive frequency. (RIT is
temporarily cancelled.) (p. 69)
When the ∂TX function is turned ON, hold down
to listen to the transmit frequency (including ∂TX
frequency offset). (p. 81)
In the simplex operation, hold down to listen to
the receive frequency.
function is temporary OFF while holding down this
switch.
In the DV mode, the RX monitoring mode is se-
lected by holding down this switch. (p. 118)
-