About Cw Pitch Control; About Keying Speed; Cw Sidetone Function; Operating Cw - Icom IC-9100 Instruction Manual

4
RECEIVE AND TRANSMIT
Operating CW (Continued)

D About the CW reverse mode

The CW reverse mode receives signals with a reverse
side CW carrier point similar to voice LSB and USB
modes.
Use when interfering signals are near a desired signal
and you want to reduce the interfering tone.
q
mode.
w
tween CW and CW-R mode, if necessary.
D
The received CW audio pitch and CW sidetone can be
adjusted to suit your preference without changing the
operating frequency.
Rotate [CW PITCH] to suit your preference.
D
The transceiver's internal electronic keyer speed can
be adjusted to between 6 and 48
.
ute)
D
When the transceiver is in the receive mode (and the
Break-in function is OFF— p. 79), you can listen to the
CW sidetone without actually transmitting.
sending, but be sure to turn OFF the Break-in func-
tion.
The CW sidetone level can be adjusted in the "Side
Tone Level" item of the Keyer Set mode (p. 54).
49
once or twice to select the CW
wpm (words per min-
BFO
Interference Desired signal
CW mode (LSB side)
-
[CW PITCH]
[KEY SPEED]
Hold down
BFO
Interference Desired signal
CW-R mode (USB side)