Speech S-Level; Main Dial Auto Ts; Mic Up/Down Speed; Afc Limit - Icom IC-9100 Instruction Manual

25.
26.
Select English or Japanese as the speech language.
27.
Select HIGH (faster) or LOW (slower) speech speed.
28.
The signal level announcement with the voice synthe-
sizer can be turned ON or OFF.
quency and mode are announced.
are announced.
29. SPEECH [MODE] SW
Turn the Operating Mode Speech function ON or OFF.
When this function is ON, the selected operating mode
is verbally announced when a mode switch is pushed.
30. [SPEECH/LOCK] SW
Select the [SPEECH/LOCK] switch action.
switch turns ON the voice synthe-
sizer function.
Holding down the [SPEECH/LOCK]
switch turns the dial lock function
ON or OFF.
switch turns the dial lock function
ON or OFF.
Holding down the [SPEECH/LOCK]
switch turns ON the voice synthe-
sizer function.
31.
Set the number of available memo pads to 5 or 10.
See page 144 for details.
32.

MAIN DIAL Auto TS

Set the Auto Tuning Step function for [MAIN DIAL].
When rapidly rotating [MAIN DIAL], the tuning step au-
tomatically changes as selected.
There are two types of auto tuning steps: LOW (Faster)
and HIGH (Fastest).
mately 2 times faster when the tuning step is
set to 5 kHz or larger steps.
33.
Set the rate at which frequencies are scanned while
-
holding down the microphone [UP]/[DN] switches.
34.
Select the RIT/∂TX frequency offset clearing opera-
tion with [CLEAR].
RIT and ∂TX frequency offset.
∂TX frequency offset.
35.
Turn the AFC (Automatic Frequency Control) limit
function ON or OFF.
The AFC function automatically compensates the tun-
ing when a received frequency drifts or goes off fre-
quency.
displayed frequency changes to reflect the
center of the signal.
quency goes off the limited frequency range,
even if received frequency is off frequency.
AFC limit value:
IF Filter width
15 kHz
10 kHz
7 kHz
SET MODE
AFC limit value
±10 kHz
±7 kHz
±5 kHz
14
1
-
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
-
17
18
19
20
21
164