Operating Mode Selection; Selecting The Ssb Mode; Selecting The Cw/Rtty Mode/Selecting The Am/Fm Mode; Selecting The Dv Mode (Including Dr Mode) - Icom IC-9100 Instruction Manual

3
BASIC OPERATION
The usable operating modes in the IC-9100 are listed
to the right.
ing the mode switch.
See the diagram to the right for the order of selection.
data mode is selected, depending on the "DATA
MOD" option in the Set mode (p. 167).
Push [SSB] to select the USB or LSB mode.
when operating below 10 MHz, LSB is selected first.
1 second to select the data mode. ("D" appears)
SSB mode.
for 1 second to toggle between
modes.
Push [AM/FM] to select the AM or FM mode.
1 second to select the data mode. ("D" appears)
AM or FM mode.
HF/50MHz frequency bands.
MHz frequency band.
tion) allows you to exchange the text message and call
sign, and transmit a position data with a third-party GPS
receiver.
Repeater) mode operation ON or OFF.
"DV" and " " appears.
mode is ON.
peater list to operate a D-STAR repeater simply.
43
-
normal and reverse
the normal
-
®
-
USB
LSB
CW
[CW/RTTY]
AM
[AM/FM]
FM
Mode switches
USB USB
CW-R CW
AM AM
DV
: Push momentary
: Hold down for 1 second
INFORMATION!
The DV mode can be selected in either MAIN or SUB
band. If you select the DV mode in both Bands, the
transceiver cannot receive on the SUB Band.
The optional UT-121 is required for DV mode operation.
USB Data
LSB Data
CW Reverse
AM Data
FM Data
DV
LSB LSB
RTTY RTTY-R
FM FM
DR