Sub Band Setting Mode Operation; The Sub Dial Function; About The Tuned Band With The Sub Dial Control - Icom IC-9100 Instruction Manual

3
BASIC OPERATION
D
Normally, tuning, operating mode selection, memory
channel selection and programming, are made for the
MAIN Band.
When the SUB Band setting mode is ON, the settings
and selections are for only the SUB Band.
Push [SUB] to turn the SUB Band setting mode ON
or OFF.
" appears when the SUB Band setting mode is
ON.
Disappears
M1
The SUB Band setting mode is OFF.
A G C D U P
D
The [SUB DIAL] control's tuning Band and frequency
steps differ, depending on the combination of the SUB
Dial function and SUB Band setting mode, and the sta-
tus of the quick tuning function.
Push [SUB DIAL] to turn the SUB Dial function ON
or OFF.
" appears when the function is ON.
( " " appears when
ON is selected.)
ON
ON
OFF
OFF
* The frequency changes in 1 Hz, 10 Hz, 1 MHz or pre-set
kHz steps, depending on the quick tuning step setting. (p.
38)
†
The frequency changes in the programmed kHz steps,
even if the quick tuning is OFF.
33
C O M P T B W S C P
( " "appears when
ON is selected.)
SUB Band*
ON
SUB Band*
OFF
SUB Band
ON
MAIN Band
OFF
Appears
Push
M1
The SUB Band setting mode is ON.
A G C D U P
†
M1
Appears when the SUB Dial function is ON.
†
A G C D U P
[SUB]
C O M P T B W S C P
[SUB DIAL]
[SUB DIAL] control
C O M P T B W S C P