Gps Out; Dvdat/Gps Out Baud; Rtty Decode Baud; Calibration Marker - Icom IC-9100 Instruction Manual

64.
Select the function of the [DATA1] jack.
----- : The [DATA1] jack is not used.
position data input.
65.

GPS Out

When a GPS receiver is connected to the [DATA1]
jack, the GPS position data is input through the jack.
the COM port ("USB2").
or "DVdat" is selected as the "USB2/DATA1 Func"
(63) option, and "GPS" is selected as the "USB2/
DATA1 Func" (64) option.
USB2 : Sends the GPS position data from
the COM port ("USB2").
66.
Set the DV or GPS data transfer speed to 4800 or
9600 bps.
67.
4800, 9600 or 19200 bps.
68.
Use as a simple frequency check of the transceiver.
See page 179 for calibration procedure.
Turn OFF the calibration marker after check-
ing the frequency of the transceiver.
69.

REF Adjust

During frequency calibration, set the internal refer-
steps.
The default setting is different for each
transceiver.
-----"
14
SET MODE
168
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21