Memory Channel Selection; Call Channel Selection - Icom IC-9100 Instruction Manual

10
When the SUB Band setting is turned ON, you can se-
lect a Memory channel in the SUB Band as well as in
the MAIN Band. (p. 33)
" appears when the SUB Band setting is ON.
D
q Push [VFO/MEMO] to select the VFO mode.
w Rotate [M-CH] to select a Memory channel num-
ber.
ory channel number.
selected.
" appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
e Push [VFO/MEMO] to select the Memory mode.
D
q Push [VFO/MEMO] to select the Memory mode.
w Rotate [M-CH] to select a Memory channel.
ory channel number.
selected.
" appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
phone [UP]/[DN] keys. In such case, the blank channels
are skipped.
Each frequency band has its own Call channel. Fac-
tory default frequency and operating modes are pro-
grammed into the Call channel. Change these to suit
your operating needs. (see page 141)
q
w
screen display.
139
-
While in the VFO mode
M1
A G C D U P
-
While in the Memory mode
M1
A G C D U P
-
M1
A G C D U P
[VFO/MEMO]
[M-CH]
Appears if the selected Memory
channel has no information.
C O M P T B W S C P
C O M P T B W S C P
Appears
A F C T O N S C P