Icom IC-9100 Instruction Manual page 152

10
All Memory channels, including scan edges and Call
channel, can be tagged with alphanumeric names of
up to 9 characters each.
Programming a memory name into
Memory channel 99.
q Push [VFO/MEMO] to select the Memory mode.
w Rotate [M-CH] to select Memory channel 99.
e Push [MENU] one or more times to display the "M2"
screen (Menu 2).
r Push [MEM](F-2) to display the "MEM" screen
(Memory Menu).
t Push [EDT](F-1) to display the "EDT" screen (Mem-
ory name Edit).
beep sounds after pushing [EDT](F1).
y Push [F-1] one or more times to select the desired
character type.
u Rotate [MAIN DIAL] to select the first character or
symbol to input.
When inputting numbers and a decimal point, push
the appropriate keypad key.
bol or number.
beep sounds. If you want to reprogram, push [Ω](F-2) or
[≈](F-3) to select a character, then push [DEL](F-4) to
delete it.
i Push [Ω](F-2) to move the cursor backwards, or
push [≈](F-3) to move the cursor forwards.
o Repeat steps y to i to program a memory name
of up to 9 characters.
!0 Push [MENU] to save the name, and return to the
"MEM" screen (Memory Menu).
!1 Push [MENU] to return to the "M2" screen (Menu
2).
ABC A to Z
abc a to z
etc
¦ _ ¯ @
143
programmed, an error
" ' ` ^ + –
[EDT]
[MENU]
M2
SCAN M E M
MEM
E D T (
Push
-
EDT
A B C
[F-1]
Programming "DX spot" into Memory
channel 99.
Character type
EDT D X
a b c
[MEM] [VFO/MEMO]
[M-CH]
S W R TCON V S C
Push
14.19500 USB
) S E L
D E L S P C
[ ] [ ] Keypad
[DEL][SPC] [MAIN DIAL]
Cursor
s p o t
D E L S P C
Input a space
Delete a character
Move cursor forwards
Move cursor backwards
Select character type