Message Transmission; Rx Message Display - Icom IC-9100 Instruction Manual

D
ON the message transmission function. When a mes-
sage channel is selected, the transceiver transmits the
pre-programmed text message. The default setting is
OFF.
q Set the operating frequency, call signs and other
settings, such as those for repeater operation, as
desired.
w In the DV mode, push [MENU] one or more times to
display the "M3" screen (Menu 3).
ush [MENU] once or twice to select
the "D1" screen.
e Push [DSET](F-5) to display the "DSET" screen.
r Push [TXM](F-3) to display the "TXM" screen
(Transmit message).
t Rotate [MAIN DIAL] to select the desired transmit
message channel, then push [SET](F-5).
y Push [MENU] to return to the "DSET" screen.
u Push [PTT] on the microphone to transmit the mes-
sage. (or push [TRANSMIT] on the transceiver)
(or [TRANSMIT]).
onds during continuous transmission.
D
q In the DV mode, push [MENU] one or more times to
display the "M3" screen (Menu 3).
the "D1" screen.
w Push [CD](F-2) to display the "CD" screen (Call Re-
cord).
e Rotate [MAIN DIAL] to select the desired record
channel (RX01 to RX20).
r Push [Z](F-1) three times to select "MSG" item.
t Push [Z](F-1) or [MENU] to return to the record
channel, selected in step e.
Up to 20 messages can be stored, but only
one message can be stored for each call sign.
The oldest message is cleared when 21st message
is received.
[TRANSMIT]
MAIN Band [MENU]
TX/RX indicator
TM1:
TXM
E D T
-
For your information
When a call with a message is received, the call sign
and the message scrolls across the function display.
The received call sign and/or message display func-
tions can be turned OFF in the DV SET mode, if de-
sired.
"RX Message Disp" item (p. 119)
"RX Call Sign Disp" item (p. 119)
[√]
[MENU]
CD
JG3YMK
JA3YUA
After selecting the record channel,
push [Z](F-1) three times.
CD MSG: REPEATER IS JP3
Ú
YHH A
DV MODE OPERATION
[DSET]/[SET]
[TXM]
[MAIN DIAL]
S E T
[CD]
[MAIN DIAL]
RX01
CLR COPY
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
112