Operating Am/Fm - Icom IC-9100 Instruction Manual

4
RECEIVE AND TRANSMIT
q Select the desired frequency band. (p. 35)
w Push [AM/FM] to select the AM or FM mode.
second to select the data mode, if needed.
e Rotate [MAIN DIAL] to tune a desired signal.
The tuning step can be changed in the tuning step pro-
gram mode. (p. 38)
r Rotate [AF] (MAIN Band) to adjust the audio to a
comfortable listening level.
t Push [PTT] on the microphone to transmit. (or
[TRANSMIT] on the transceiver)
y Speak into the microphone at your normal voice
level.
step, if necessary.
u Release [PTT] to receive. (or push [TRANSMIT]
again)
HF/50MHz frequency bands.
MHz frequency band.
*AM only
61
[TRANSMIT] TX/RX indicator (MAIN Band)
[AF] [MIC GAIN] [AM/FM]
(MAIN Band)
AM mode
Appears
FM mode
Appears
M1
A G C D U P
M1
A G C D U P A F C
[MAIN DIAL]
S C P
T O N S C P