Data Cloning - Icom IC-2820H Instruction Manual

15
OTHER FUNCTIONS

■ Data cloning

Cloning allows you to quickly and easily transfer the pro-
grammed contents from one transceiver to another; or, data
from a personal computer to a transceiver using the optional
CS-2820
CLONING SOFTWARE
D Cloning between transceivers
qConnect the optional OPC-474 cloning cable to the [SP-2]
jack of the master and sub-transceivers.
• The master transceiver is used to send data to the sub-trans-
ceiver.
117
POWER ON
AT
.
To [SP-2] To [SP-2]
Optional
OPC-474
wWhile pushing right band's [M/CALL•MW], turn power ON
to enter cloning mode
(master transceiver only— power on only
.
for sub-transceiver)
• "CLONE" and "M" appear and the transceivers enter the clone
standby condition.
While pushing right band's [M/CALL•MW], turn power ON.
ePush [M/CALL•MW]
(Right band's)
ceiver.
• "CLONE OUT" appears in the master transceiver's display and
the bar meter shows that data is being transferred to the sub-
transceiver.
• "CLONE IN" appears automatically in the sub-transceiver's dis-
play and the bar meter shows that data is being received from
the master transceiver.
Pushing right band's [M/CALL•MW] start cloning.
rWhen cloning is finished, turn power OFF, then ON to exit
cloning mode.
on the master trans-