Front Panel Facilities; Antenna Tuner Switch; Antenna Meter Switch; Electronic Keyer Jack - Icom IC-9100 Instruction Manual

1

PANEL DESCRIPTION

q
w
e
r
t
y
u
i
q POWER SWITCH [POWER] (p. 31)
Push to turn ON the transceiver power.
Hold down for 1 second to turn OFF the power.
w TRANSMIT SWITCH [TRANSMIT] (p. 46)
Push to select transmit or receive.
tor (i) lights red. Only on the satellite mode, the SUB
Band's TX/RX indicator (!6 ) lights red.
tor lights green.
e ANTENNA TUNER SWITCH [TUNER] (p. 159)
Push to turn the internal antenna tuner ON or
OFF (bypass).
" appears when the tuner is turned ON.
rized in each frequency band.
Hold down for 1 second to manually start the an-
tenna tuner.
onds, the tuning circuit is automatically bypassed.
r
Push to select either the ANT1 or ANT2 connec-
tor.
Hold down for 1 second to toggle the transmit
meter function between ALC, COMP and SWR.
1
!2 !1
o !0
(p. 158)
(p. 45)
t HEADPHONE JACK [PHONES]
Plug in standard stereo headphones (impedance: 8
ø
to 16 ).
and any external speaker, are disabled.
-
rated when using stereo headphones, depending on the
"Phone Separate" option in the Set mode. (p. 166)
y ELECTRONIC KEYER JACK [ELEC-KEY]
-
Plug in a bug or paddle type key to use the internal
electronic keyer for CW operation. (p. 22)
key in the "Keyer Type" item of the Keyer Set mode.
be selected in the "Keyer Type" item of the Keyer Set
mode. (p. 55)
-
dash) in the "Paddle Polarity" item of the Keyer Set mode.
(p. 55)
-
venience. (p. 51)
u MICROPHONE CONNECTOR [MIC]
Plug in the supplied or an optional microphone.
i
Lights green when the squelch opens, or a signal
transmit.
Blinks green when an off-frequency signal is re-
ceived, depending on the "FM/DV Center Error"
option in the Set mode. (p. 162)
ø load.
-
-
(dot)
(com)
(dash)