Updating the Firmware
Firmware for the TLI Pro 101 can be upgraded using Toolbelt or the TLI Pro 101 web page.
Before starting, consult your IT team and ensure that the interface has a unique IP address.
To update firmware, first download and run the file from the Extron website. Then use Toolbelt
or the TLI Pro 101 web page to upload the file to the touchpanel.
Downloading Firmware Using Extron Firmware Loader
1.
2.
3.
4.
The firmware must be downloaded to a PC on the same sub-network as the TLI Pro 101.
Figure 27.
Firmware Download Center
Go to
www.extron.com
and click
Click
(
).
Firmware
2
The
page opens:
Download Firmware
Figure 28.
Selecting Firmware to Download.
Click the letter
T
from the list of letters (
(
1
).
Download
1
).
TLI Pro 101 • Internal Web Pages
27