Table of Contents
Advertisement
Introduction
About This Guide
This guide describes the function, installation, configuration, and operation of the
Extron IPL T S Series interface devices which are shown below.
•
•
About the IPL T S Series Interface
The Extron IPL T S Series interface devices integrate network connectivity into audio/
video (AV) systems. Installing an IPL T S Series interface into an AV network gives users the
ability to remotely monitor and control projectors, flat-panel displays, switchers, and other
serially-controlled devices.
IPL T S1 control interface
•
•
•
•
IPL T S2 control interface
•
•
•
IPL T S4 control interface
•
•
•
About the IPL T S Series Interface
Features
One bi-drectional RS-232 serial port
7.25 MB of available flash memory
Low-profile form factor
1.0 inch H x 4.3 inches W x 3.0 inches D
(2.5 cm x 10.9 cm x 7.6 cm)
Two bi-drectional RS-232, RS-422, or RS-485
serial ports
7.25 MB of available flash memory
1.7 inches H x 4.3 inches W x 3.0 inches D
(4.3 cm x 10.9 cm x 7.6 cm)
Four bidirectional RS-232, RS-422, or
RS-485 serial ports
7.25 MB of available flash memory
1.7 inches H x 4.3 inches W x 3.0 inches D
(4.3 cm x 10.9 cm x 7.6 cm)
IPL T S Series • Introduction
1
Advertisement
Table of Contents
