Omron FQ2-S Series User Manual page 85

Applying the Results of Position Compensation
You can apply the results of position compensation either to the Camera image or to the previous image from
before position compensation was applied.
If you apply the results of position compensation to the Camera image, only the position information from
position compensation is applied to the image to be measured.
Using Filter Items for Processing with Position Compensation Items: p. 84
• Setting the Image for Position Compensation
You can select the image to which to apply the results of position compensation processing.
You can set the image for position compensation for each position compensation item.
[Image] − [Image adjustment] − (Position compensation item name) − [Modify]
1 −
Press [Details] [Scroll parameter]
2
Set the source image to [Camera] or [Prev.].
Parameter
Source image Camera (camera image)
Prev. (previous image) (default)
FQ2-S/CH User's Manual
Setting
The results of processing the position compensation item is applied to
the image that is taken by the Camera.
This setting is used when filter items or other position compensation
items have been used specifically for the position compensation item.
This setting is used when the processing results of the current position
item are to be applied to the image that results from previous filter items
or other position compensation items.
Description
Using Filter Items for Processing with Position Compensation
Items: p. 84.
Adjusting the Images That Were Taken
83