Checking the cause of a sensor NG from the multisensor display
It is easy to check the cause of a sensor NG when multiple sensors are connected.
You can immediately move between the detailed result display of a sensor, the multi-sensor display, and the
result list display.
(Setup Mode) − [TF settings]
1
Press the [Multi sensor button] in [Disply setting in Run mode].
(1) Detailed results display
(1) Press [Multi sensor] in the detailed results display to move to the Switch sensor display.
(2) In the switch sensor display, press the sensor whose results you want to check. The result list display of that sensor appears.
(3) In the result list display, press the inspection item for which the NG occurred. The detailed results display of the selected
inspection item appears.
FQ2-S/CH User's Manual
(3) All results/region display
(2) Switch sensor display
Convenient Functions for Operation
287