Labeling (Fq2-S1/S2/S3 Series Or Fq2-S4 Series Only) - Omron FQ2-S Series User Manual

Labeling (FQ2-S1/S2/S3 series or FQ2-S4 series only)

External Category Data name
refer-
ence
number
0 Mea- Judgement
sure-
ment
result
5 Number of labels
6 Area
7 Gravity center X
8 Gravity center Y
9 Reference area
10 Reference position X
11 Reference position Y
15 Total label area
55 Master angle
103 Output Reflect
parame-
ter
127 Extracte Background color
d image
display
condition
131 Set color Area color inversion
Binary
132 Mea- Filling up holes
sure-
ment
133 Outside trimming
condi-
tions
136 Label sort condition
146 Binary Binary level upper limit Setting/Acqui-
level
147 Binary level lower limit
388
External Reference Parameters
Setting/Acqui- Data range
sition
−2: No judgement (not mea-
Acquisition
only sured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed
error,
−14: Figure not registered error,
−15: Out of range error
Acquisition 0 to 100
only
Acquisition 0 to 999,999,999.9999
only
−99,999.9999 to 99,999.9999
Acquisition
only
−99,999.9999 to 99,999.9999
Acquisition
only
Acquisition 0 to 999,999,999.9999
only
−99,999.9999 to 99,999.9999
Acquisition
only
−99,999.9999 to 99,999.9999
Acquisition
only
Acquisition 0 to 999,999,999.9999
only
−180 to 180
Acquisition
only
Setting/Acqui- 0: Yes, 1: No
sition
Setting/Acqui- 0: Black, 1: White, 2: Red, 3:
sition Green, or 4: Blue
Setting/Acqui- 0: None or 1: Enabled
sition The binary value is displayed for
a Monochrome Camera.
Setting/Acqui- 0: No, 1: Yes
sition
Setting/Acqui- 0: No, 1: Yes
sition
Setting/Acqui- 0: Ascending order of area,
sition 1: Descending order of area,
2: Ascending order of gravity X,
3: Descending order of gravity
X,
4: Ascending order of gravity Y,
5: Descending order of gravity Y
0 to 255
sition
Setting/Acqui- 0 to 255
sition
Default Expres- Logged data/
sion text Judgement
string parameter
−2
JG Logged data
0 L Logged data
0 AR[0] to Logged data
AR[99]
0 X[0] to Logged data
X[99]
0 Y[0] to Logged data
Y[99]
0 SA ---
0 SX ---
0 SY ---
0 TAR Logged data
0 ATH[0] to Logged data
ATH[99]
0 --- ---
0 --- ---
0 --- ---
0 --- ---
0 --- ---
1 --- ---
255 --- ---
128 --- ---
FQ2-S/CH User's Manual