Omron FQ2-S Series User Manual page 120

9
The extracted characters will be displayed on the up-
per left of the display.
10
Press [OK] to register the characters.
11
The characters are registered for the corresponding
character type.
Error Messages during Registration
• Failed to register data. Character format is wrong.
The format or the number of characters did not match between the read character string and the registered charac-
ter string. Correct the character string to register.
• Failed to register data. Character size is too small
You can register characters that are 30 × 30 pixels or larger in the dictionary. Change the settings of the Sensor to
increase the size of the characters.
• Extraction error
Failed to extract the characters. Check the measurement parameter settings and the read region.
• Excess char. num
An attempt was made to register more than 10 characters. Delete the data that does not need to be registered.
Displaying Registered Characters
1
To display the registered characters, select the char-
acters on the upper left of the display.
118
Reading and Verifying Character Strings FQ2-S/CH User's Manual