Omron FQ2-S Series User Manual page 71

Parameter
Shutter speed Range:
Gain For FQ2-S3@@@@@-08@, FQ2-S3@-@@@, FQ2-
S4@@@@@-08@, FQ2-S4@-@@@
Range: 0 to 10
Default: 0
For FQ2-S1@@@@@, FQ2-S2@@@@@, FQ2-
S4@@@@@@, FQ2-S4@@@@@@-M, FQ2-CH1@@@@@-M
Range: 16 to 64
Default: 16
Important
• To ensure stable operation when the FQ2-S1@@@@@/FQ2-S2@@@@@/FQ2-S4@@@@@/FQ2-S4@@@@@-M is
connected, we recommend that you set the gain to 16.
• If the recommended value is exceeded, the brightness will not be stable and measurement values may be
inconsistent. We recommend that you turn ON the Brightness Connection Mode.
• If a slow shutter speed (1/1 to 1/10) and a high gain are set, fixed-pattern noise (fleck and striped noise) will
sometimes occur. Be sure to thoroughly check the images and the measurement results when you set the
shutter speed and gain.
When HDR Is ON
Set the brightness adjustment value. The higher the brightness adjustment value, the brighter the image.
Dark
Brightness of image
0
[Image] − [Camera setup]
1
] − [Brightness] on the right side of the display.
Press [
2
Move the bar to the left or right to adjust the bright-
ness.
Moving it to the right will make the image brighter, while
moving it to the left will reduce the brightness of the im-
age.
3
Press [OK].
FQ2-S/CH User's Manual
Setting
For FQ2-S3@-@@@, FQ2-S4@-@@@
1/1 to 1/4,155
For FQ2-S3@@@@-08@, FQ2-S4@@@@-08@
Built-in lighting off: 1/1 to 1/4,155
Built-in lighting on: 1/250 to 1/60,000 (control by light-
ing emission time)
For FQ2-S1@@@@@, FQ2-S2@@@@@, FQ2-
S4@@@@@,
For FQ2-S4@@@@@-M, FQ2-CH1@@@@@-M
Built-in lighting off: 1/1 to 1/50,000
Built-in lighting on: 1/250 to 1/50,000
Default: 1/250
If the shutter speed is slow, the image will be
bright. If the shutter speed is fast, the image
will be dark.
If the gain is high, the image will be bright. If
the gain is low, the image will be dark.
Bright
100
Adjusting Image Quality
Description
69