Detailed Parameters - Omron FQ2-S Series User Manual

Detailed Parameters

With the default settings, all of the parameters are set automatically.
If scanning cannot be performed because the code is different or otherwise, set the measurement parameters
manually and execute teaching.
[Inspect] - [Inspection] - [Add item] - [2D-code (DPM)] - [Details] Tab Page - [Meas. Parameter]
Measurement Parameters
Parameter Setting
Code type DataMatrix
QR Code
Auto (default)
Auto length No
Yes (default)
Size 50 to 480 (default)
Reverse Normal
Reverse
Auto (default)
Code color Black
White
Auto (default)
Fast mode Yes, No (default)
Shape Square
(DataMatrix only) Rectangle
Auto (default)
QR Code Model Model 1
(QR Code only) Model 2
Auto (default)
Error Correction Level L (7%)
(QR Code only) M (15%)
Q (25%)
H (30%)
Auto (default)
21 × 21, 25 × 25, 29 × 29,
Cell
33 × 33, 37 × 37, 41 × 41,
(QR Code only)
45 × 45, 49 × 49, 53 × 53,
57 × 57, Auto (default)
Cell Shape: Square
10 × 10, 12 × 12, 14 × 14,
(DataMatrix only)
16 × 16, 18 × 18, 20 × 20,
22 × 22, 24 × 24, 26 × 26,
32 × 32, 36 × 36, 40 × 40,
44 × 44, 48 × 48, 52 × 52,
64 × 64, Auto (default)
Shape: Rectangle
8 × 18, 8 × 32, 12 × 26,
12 × 36, 16 × 36, 16 × 48,
Auto (default)
Timeout 1 to 9999 ms (default value:
9999)
Important
• All of the parameters except for the [Fast mode] measurement parameter are set when you press the [Teach] But-
ton.
FQ2-S/CH User's Manual
Description
Sets the type of code to be scanned.
Sets whether the code length is automatically acquired.
Sets the length of the code on the display. (pixels)
Sets normal image or reverse (mirror) image.
Sets the color of the code.
Sets fast mode.
When ON, the scanning time is shorter.
For certain work, the scanning time may be longer when Fast mode is ON.
Please use after performing test measurements and verifying the scanning
speed.
Sets the code shape.
Sets the QR Code model.
Sets the error correction level (ECC level).
(The ECC level of DataMatrix is fixed at 200.)
Sets the number of code cells.
Sets the number of code cells.
Sets the timeout time in read processing. A read error occurs if measure-
ment does not end after the preset timeout time is exceeded.
Reading 2D Codes (DPM)
145