Omron FQ2-S Series User Manual page 279

2
The following display will appear if [Logging image] is
pressed.
Select whether to save the most recently logged image or
to save all of the image data that is logged in the Sensor.
The file storage locations and file format are given in the following table.
Item Storage location
Statistical data \sensor_name\LOGDATA
Logging data (measurement
data)
Logging image (image data) \sensor_name\LOGIMAGE
*1: Files are stored in the following folder when the PC Tool is used.
\My Documents\OMRON FQ\SDCard
*2: You can add a character string to the beginning of the file name.
*3: You can change the "img" at the beginning of the file name.
• File format
Statistical data: The data is saved in the following CSV format.
Number of measurements, number of OKs, number of NGs, OK rate, NG rate (delimiter)
Image data: Image data is saved in a special format for OMRON Vision Sensors.
(The file name extension is IFZ.)
Measurement data: Measurement data is saved in CSV format.
The same format is used to log the most recent results to files for the inspection item region and expression
region in the file logging function.
File Logging Format: Items 6 and 7 on p. 273
Note
• The saved recent measurement data cannot be loaded back into the Sensor and displayed on a trend monitor or histo-
gram.
• The data and time are not recorded with the measurement data.
The file name is created from the time when the file is saved. It does not indicate when the measurement was made.
Important
The recent log data will be cleared if the scene is changed.
Changing the Format for Saving Measurement Data
The output CSV file format can be changed according to the external device.
Changing the File Format: p. 273
FQ2-S/CH User's Manual
File name
*1
YYYY_MM_DD-HH_MM_SS_record.CSV
Example: The following name would be used for
measurements performed at 10:10:21 pm on May
10, 2012: 2012_05_10-22_10_21_record.CSV
*1
img_Scn0**_YYYY_MM_DD-HH_MM_SS(n)_
MeasurementID_OverallJudgementResult.IFZ
Example: The following name would be used for
measurements performed at 10:10:21 pm on May
10, 2012:
img_2012_05_10-22_10_21(0)_0000_OK.IFZ
"n" is a serial number that is added when images
are logged at the same time.
Logging Measurement Data and Image Data
*2
*3
277