Measurement Data That Can Be Logged For Labeling; Errors - Omron FQ2-S Series User Manual

Measurement Data That Can Be Logged for Labeling

You can select to log any of the following values.
Measurement item Range of value
Judgement 0: Judgement is OK
−1: Judgement is NG
−13: Teaching not performed error
−14: Figure not registered error
−15: Out of range error
Number of labels 0 to 100
Total label area 0 to 999,999,999.9999
Area 0 to 999,999,999.9999
−99999.9999 to 99999.9999
Gravity center X
−99999.9999 to 99999.9999
Gravity center Y
−180 to 180
Master angle
* When logging data is output, the data is output in the order of the above table.
If more than one item is stored, results are output in order for each label.
Example:
[# of label] [Total label area] [Area 0.X] [Area 0.Y] [Gravity center 0.X] [Gravity center 0.Y] [Mater angle 0.ATH]
... [Area N.X] [Area N.Y] [Gravity center N.X] [Gravity center N.Y] [Master angle N.ATH] ... [Number of Label
(Count-1).X] [Number of Label (Count-1).Y] [Number of Label (Count-1).TH]
7-6 Logging Measurement Data and Image Data p. 269

Errors

Errors in Teaching
A teaching error message will appear if the reference area registered during teaching is 0. Perform the
following.
• If the color of the measurement object has changed from the specified color, set the color again and try teaching
again.
212
Inspecting with the Labeling Inspection Item
Description
This is the measurement judgement results.
This is the number of labels.
This is the total area of all extracted labels.
This is the area of the detected label (100 max.).
This is the gravity coordinate X of the detected label (100 max.).
This is the gravity coordinate Y of the detected label (100 max.).
This is the master angle of the detected label (100 max.).
FQ2-S/CH User's Manual