Omron FQ2-S Series User Manual page 73

Observe the following precautions.
• Use the HDR function only for objects that are not moving to avoid image blurring.
Several images are taken with different shutter speeds and combined. If the object moves while the image
is being taken, the image will become blurred.
• Images with different brightnesses are combined, so the resulting image will have a lower degree of con-
trast.
[Image] − [Camera setup]
1
] − [HDR] on the right side of the display.
Press [
2
Set the best level for the HDR Mode.
As shown below, the higher the level, the wider the combined dy-
namic range will be.
Level 1
Level 2
Level 3
Level 4
Dark
Using a Polarizing Filter (Only for Sensors with Built-in Lighting)
Specular reflections can be eliminated from an image by attaching an FQ-XF1 Polarizing Filter to the Sensor.
Observe the following precautions.
• The image will be darker compared to when no filter is used.
• If the image becomes too dark, adjust the brightness.
Adjusting the Brightness
When HDR Is OFF: p. 68
When HDR Is ON: p. 69
• Mounting the Filter
1
Hook the filter in the hole at the top of the Sensor.
2
Using the top section as a pivot point, pull down the
filter so that it attaches to the Sensor.
FQ2-S/CH User's Manual
Bright
Adjusting Image Quality
71