Omron FQ2-S Series User Manual page 243

The following displays are convenient if more than one Sensor is connected.
Multi sensor
Displays the measurement results of
all connected Sensors.
Green display: OK, Red display: NG
(Run Mode) − [Sensor monitor]
When multiple sensors are connected, switching from [Sensor monitor] to [Single Sensor], [Multi sensor], or
[NG sensor] is possible.
Specifying the Startup Run Mode Display
The display that appears when power supply is turned ON can be set. The default setting is [Graphics +
Details]. This only appears when [Start screen type] under [Startup display] is set to [Single sensor].
(Setup Mode or Run Mode) − [TF settings] − [Startup display] − [Display pattern]
Note
• You can set the scene to be displayed when the power supply is turned ON.
Setting the Startup Scene: p. 252
• The default display setting for startup can be changed.
Selecting the Display When More Than One Sensor Is Connected: p. 267
FQ2-S/CH User's Manual
NG sensor
Automatically changes to the display for
any Sensor with an NG result.
Configuring the Run Mode Display
241