Changing The Label Extraction Conditions - Omron FQ2-S Series User Manual

Parameter Setting
Filling up holes Yes
No (default)
Yes
Extract image
No (default)

Changing the Label Extraction Conditions

Set the label extraction conditions. You can select to extract only labels that satisfy all four of the following:
Number of labels, specified area, gravity X, and gravity Y conditions.
− [Inspection] −
[Inspect]
−
Parameter] [Extraction condition]
1
Press and set each of the parameters for the extrac-
tion conditions.
Item Parameter Setting
Extraction Number of Range: 1 to 100
condition labels Default: 100
Area Range: 0 to 999,999,999.9999
Defaults: Upper limit: 999,999,999.9999,
Lower limit: 0
Range: −99,999,999.9999 to
Gravity X
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: −999,999,999.9999
Range: −999,999,999.9999 to
Gravity Y
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: −999,999,999.9999
FQ2-S/CH User's Manual
Description
Sets how to process areas surrounded by the specified color. If [Yes]
is set, those areas are processed as the specified color.
Input Image
Select this option if there are areas of the specified color inside the
measurement region that you do not want to measure. If [Yes] is set,
all areas outside the measurement region are cut out as the specified
color.
Measurement region
You need to know the
position and area of
this label.
− −
[Labeling] [Modify] [Settings] Details
Filled Image
Yes
You can find the position
and area of the center label
if you set the sort condition
to sort by descending order
of area. Areas outside the
measurement region are set
to the color for measure-
ment.
−
[Details] Tab Page
Description
Set the maximum number of labels to detect.
Specify the area range to judge as a label.
Specify the gravity X position to judge as a label.
Specify the gravity Y position to judge as a label.
Inspecting with the Labeling Inspection Item
−
[Meas.
209